ZyXEL Communications Prestige 681 Guia do Utilizador Página 121

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 120
Prestige 681 SDSL Router
System Maintenance 11-7
Table 11-3 System Maintenance Menu Syslog Parameters
Parameter Description
UNIX Syslog:
Active Use the [SPACE BAR] to turn on or off syslog.
Syslog IP Address Enter the IP Address of the server that will log the CDR (Call Detail Record) and
system messages i.e., the syslog server.
Log Facility
Use the [SPACE BAR] to toggle between the 7 different Local options. The log
facility allows you to log the message to different files in the server. Please refer to
your UNIX manual for more detail.
Types:
CDR
Call Detail Record (CDR) logs all data phone line activity if set to
Yes.
Packet triggered The first 48 bytes or octets and protocol type of the triggering packet is sent to the
UNIX syslog server when this field is set to
Yes.
Filter log
No filters are logged when this field is set to
No.
Filters with the individual filter
Log
Filter
field set to
Yes
are logged when this field is set to
Yes.
PPP log
PPP events are logged when this field is set to
Yes.
Your Prestige sends four types of syslog messages. Some examples (not P681 specific) of these syslog
messages with their message formats are shown next:
1.
CDR
CDR Message Format
SdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
Channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
L02 Tunnel Connected(L2TP)
C02 OutCall Connected xxxx (means connected speed) xxxxx (means Remote Call Number)
L02 Call Terminated
C02 Call Terminated
Vista de página 120
1 2 ... 116 117 118 119 120 121 122 123 124 125 126 ... 147 148

Comentários a estes Manuais

Sem comentários