ZyXEL Communications VSG1432 Guia de Configuração descarregar pdf (Página 28)

VSG1432 User Setup Guide28

2.5.1 Port Forwarding

Thomas needs to configure the port settings and IP address on the Device. Traffic should be

forwarded to TCP/UDP port 6500, and UDP ports 2302 and 13139 of the server computer which has

an IP address of 192.168.1.34.

Thomas may set up the port settings by configuring the port settings for the server computer.

1 Click Network Settings > NAT > Add new rule and configure the screen with the following

values:

2 The screen should look as follows. Click Apply.

3 Repeat steps 1 and 2 for UDP ports 2302 and 13139. The port forwarding settings you configured

appear in the table.

Players on the Internet then can have access to Thomas’ server.

Service Name CivIV

External Port/s Enter 6500 as the Start and End port.

Server IP Address Enter the IP address of the server. This is 192.168.1.34 for this example.

Protocol Select TCP/UDP. This should be the protocol supported by the server.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 55 56

Sem comentários

ZyXEL Communications VSG1432 Guia de Configuração Página 28