ZyXEL Communications VSG1432 Guia de Configuração descarregar pdf (Página 31)

VSG1432 User Setup Guide

2.6.1 Registering a DDNS Account on www.dyndns.org

1 Open a browser and type http://www.dyndns.org.

2 Apply for a user account. This tutorial uses UserName1 and 12345 as the username and

password.

3 Log into www.dyndns.org using your account.

4 Add a new DDNS host name. This tutorial uses the following settings as an example.

•Hostname: zyxelrouter.dyndns.org

•Service Type: Host with IP address

• IP Address: Enter the WAN IP address that your Device is currently using. You can find the IP

address on the Device’s Web Configurator Status page.

Then you will need to configure the same account and host name on the Device later.

2.6.2 Configuring DDNS on Your Device

Configure the following settings in the Network Setting > DNS Setting > Dynamic DNS screen.

•Select Enable Dynamic DNS.

•Select DynDNS.org as the service provider.

•Type zyxelrouter.dyndns.org in the Host Name field.

• Enter the user name (UserName1) and password (12345).

Click Apply.

2.6.3 Configuring Port Forwarding on your Device

Configure the following settings in the Network Setting > NAT > Port Forwarding > Add new

rule screen.

•Select Active.

•Type RD in the Service Name.

•Type 3389 in the External/Internal Start/End Port fields. This is the listening port for

Windows remote desktop.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 55 56

Sem comentários

ZyXEL Communications VSG1432 Guia de Configuração Página 31