ZyXEL Communications VSG1432 Guia de Configuração descarregar pdf (Página 50)

VSG1432 User Setup Guide50

3.3 Device Access and Login

I forgot the IP address for the Device.

1 The default LAN IP address is 192.168.1.254.

2 If you changed the IP address and have forgotten it, you might get the IP address of the Device by

looking up the IP address of the default gateway for your computer. To do this in most Windows

computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default

Gateway might be the IP address of the Device (it depends on the network), so enter this IP

address in your Internet browser.

3 If this does not work, you have to reset the device to its factory defaults. See Section 2.12 on page

44.

I forgot the password.

1 The default username and password is on the cover of this guide and on the label on the bottom of

the Device.

2 If this does not work, you have to reset the device to its factory defaults. See Section 2.12 on page

44.

I cannot see or access the Login screen in the web configurator.

1 Make sure you are using the correct IP address.

• The default IP address is 192.168.1.254.

• If you changed the IP address, use the new IP address.

• If you changed the IP address and have forgotten it, see the troubleshooting suggestions for I

forgot the IP address for the Device.

2 Check the hardware connections, and make sure the LEDs are behaving as expected. See Section

1.6 on page 8.

3 Make sure your Internet browser does not block pop-up windows and has JavaScripts and Java

enabled.

4 Reset the device to its factory defaults, and try to access the Device with the default IP address.

See Section 2.12 on page 44.

5 If the problem continues, contact the network administrator or vendor, or try one of the advanced

suggestions.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56

Sem comentários

ZyXEL Communications VSG1432 Guia de Configuração Página 50