ZyXEL Communications ZyWALL 70 Informações Técnicas descarregar pdf (Página 69)

ZyWALL 1050 Support Notes

Asia Regional Center ZyWALL 1050 interface and VPN concentrator setting

The VPN configuration parameter for Asia and Europe regional Center ZyWALL 1050

Asia Regional Center ZyAWLL1050 Europe Regional Center ZyAWLL1050

WAN1:179.25.3.24

WAN2:179.25.133.4

LAN:192.168.10.1/24

WAN1:220.123.113.8

WAN2:220.123.119.9

LAN:192.168.20.1/24

Phase 1

Negotiation Mode : Main

Pre-share key: 123456789

Encryption :DES

Authentication :MD5

Key Group :DH1

Phase 1

Negotiation Mode : Main

Pre-share key: 123456789

Encryption :DES

Authentication :MD5

Key Group :DH1

Phase2

Encapsulation: Tunnel

Active Protocol: ESP

Encryption: DES

Authentication: SHA1

Perfect Forward Secrecy (PFS): None

Phase2

Encapsulation: Tunnel

Active Protocol: ESP

Encryption: DES

Authentication: SHA1

Perfect Forward Secrecy (PFS): None

Please refer to the application topology to setup the ZyWALL 1050 interface first. We can

move to next steps only after setting up the interface. We use ge1 as LAN interface and IP

address is 192.168.10.1/255.255.255.0. The ge2 and ge3 are WAN1 and WAN2 interfaces and

IP address are 179.25.3.24/255.255.0.0 and 179.25.133.4/255.255.0.0.

We have to pre-configure some address objects for the later VPN configuration

requirements. The needed address objects list is as follows:

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 297 298

Sem comentários

ZyXEL Communications ZyWALL 70 Informações Técnicas Página 69