ZyXEL Communications MAX218MW Guia do Utilizador descarregar pdf (Página 47)

Chapter 6 Wireless LAN

WRE2205 User’s Guide

Figure 33 Network > Wireless LAN > WPS

The following table describes the labels in this screen.

6.9 WPS Station Screen

Use this screen when you want to add a wireless station using WPS. To open this screen, click

Network > Wireless LAN > WPS Station tab.

Note: Note: After you click Push Button on this screen, you have to press a similar

button in the wireless station utility within 2 minutes. To add the second wireless

station, you have to press these buttons on both device and the wireless station

again after the first 2 minutes.

Table 17 Network > Wireless LAN > WPS

LABEL DESCRIPTION

WPS Setup

Enable WPS Select this to enable the WPS feature.

PIN Number This displays a PIN number last time system generated. Click Generate to generate a

new PIN number.

WPS Status

Status This displays Configured when the WRE2205 has connected to a wireless network using

WPS or when Enable WPS is selected and wireless or wireless security settings have

been changed. The current wireless and wireless security settings also appear in the

screen.

This displays Unconfigured if WPS is disabled and there are no wireless or wireless

security changes on the WRE2205 or you click Release_Configuration to remove the

configured wireless and wireless security settings.

Release

Configuration

This button is only available when the WPS status displays Configured.

Click this button to remove all configured wireless and wireless security settings for WPS

connections on the WRE2205.

Apply Click Apply to save your changes back to the WRE2205.

Refresh Click Refresh to get this screen information afresh.

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 73 74

Sem comentários

ZyXEL Communications MAX218MW Guia do Utilizador Página 47