Zyxel-communications 5 Series Manual do Utilizador descarregar pdf (Página 216)

100

101

ZyWALL 5/35/70 Series User’s Guide

216 Chapter 10 Wireless LAN

Figure 101 NETWORK > WIRELESS CARD: No Access 802.1x + Static WEP

The following wireless LAN security fields become available when you select No Access

802.1x + Static WEP in the Security drop down list-box.

10.16.8 No Access 802.1x + No WEP

Click the NETWORK > WIRELESS CARD to display the Wireless Card screen. Select No

Access 802.1x + No WEP to deny all wireless stations access to your wired network and

block all wireless stations from communicating with the ZyWALL.

Table 62 NETWORK > WIRELESS CARD: No Access 802.1x + Static WEP

LABEL DESCRIPTION

Security Select No Access 802.1x + Static WEP from the drop-down list.

WEP

Encryption

WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized

wireless stations from accessing data transmitted over the wireless network.

Select 64-bit WEP or 128-bit WEP to enable data encryption.

Key 1 to Key 4 If you chose 64-bit WEP in the WEP Encryption field, then enter any 5 characters

(ASCII string) or 10 hexadecimal characters ("0-9", "A-F") preceded by 0x for each

key.

If you chose 128-bit WEP in the WEP Encryption field, then enter 13 characters

(ASCII string) or 26 hexadecimal characters ("0-9", "A-F") preceded by 0x for each

key.

There are four data encryption keys to secure your data from eavesdropping by

unauthorized wireless users. The values for the keys must be set up exactly the same

on the access points as they are on the wireless stations.

Apply Click Apply to save your changes back to the ZyWALL.

Reset Click Reset to begin configuring this screen afresh.

1 2 ... 211 212 213 214 215 216 217 218 219 220 221 ... 834 835

Comentários a estes Manuais

Sem comentários

Zyxel-communications 5 Series Manual do Utilizador Página 216

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications 5 Series