Zyxel-communications 5 Series Manual do Utilizador descarregar pdf (Página 799)

100

101

ZyWALL 5/35/70 Series User’s Guide

Appendix K Command Interpreter 799

APPENDIX K

Command Interpreter

The following describes how to use the command interpreter. Enter 24 in the main menu to

bring up the system maintenance menu. Enter 8 to go to Menu 24.8 - Command Interpreter

Mode. See the included disk or zyxel.com for more detailed information on these commands.

Note: Use of undocumented commands or misconfiguration can damage the unit and

possibly render it unusable.

Command Syntax

• The command keywords are in courier new font.

• Enter the command keywords exactly as shown, do not abbreviate.

• The required fields in a command are enclosed in angle brackets <>.

• The optional fields in a command are enclosed in square brackets [].

•The |symbol means or.

For example,

sys filter netbios config <type> <on|off>

means that you must specify the type of netbios filter and whether to turn it on or off.

Command Usage

A list of valid commands can be found by typing help or ? at the command prompt. Always

type the full command. Type exit to return to the SMT main menu when finished.

Command Examples

This section provides some examples of commands you can use on the ZyWALL. See the

other appendices for more examples.

Configuring What You Want the ZyWALL to Log

1 Use the sys logs load command to load the log setting buffer that allows you to

configure which logs the ZyWALL is to record.

2 Use

sys logs category to view a list of the log categories.

1 2 ... 794 795 796 797 798 799 800 801 802 803 804 ... 834 835

Comentários a estes Manuais

Sem comentários

Zyxel-communications 5 Series Manual do Utilizador Página 799

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications 5 Series