Zyxel-communications 662HW Series Manual do Utilizador descarregar pdf (Página 125)

100

101

Prestige 662H/HW Series User’s Guide

125 Chapter 9 WAN Setup

Figure 43 Advanced Modem Setup

The following table describes the fields in this screen.

Table 29 Advanced Modem Setup

LABEL DESCRIPTION

AT Command

Strings

Dial Type the AT Command string to make a call. Example: atdt

Drop Type the AT Command string to drop a call. "

~" represents a one second wait, for

example, "

~~+++~~ath" can be used if your modem has a slow response time.

Answer Type the AT Command string to answer a call. Example: ata

Drop DTR When

Hang Up

Select this check box to have the Prestige drop the DTR (Data Terminal Ready)

signal after the "

AT Command String: Drop" is sent out.

AT Response

Strings

CLID Type the keyword that precedes the CLID (Calling Line Identification) in the AT

response string. This lets the Prestige capture the CLID in the AT response string

that comes from the WAN device. CLID is required for CLID authentication.

Example: NMBR

Called ID Type the keyword preceding the dialed number.

Speed Type the keyword preceding the connection speed. Example: CONNECT

Call Control

Dial Timeout Type a number of seconds for the Prestige to try to set up an outgoing call before

timing out (stopping). Example: 60

Retry Count Type a number of times for the Prestige to retry a busy or no-answer phone

number before blacklisting the number. Example: 0

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 562 563

Comentários a estes Manuais

Sem comentários

Zyxel-communications 662HW Series Manual do Utilizador Página 125

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications 662HW Series