Zyxel-communications 662HW Series Manual do Utilizador descarregar pdf (Página 401)

100

101

Prestige 662H/HW Series User’s Guide

401 Chapter 40 Firmware and Configuration File Maintenance

Refer to the TFTP and FTP over WAN Management Limitations section to read about

configurations that disallow TFTP and FTP over WAN.

40.2.9 Backup Via Console Port

Back up configuration via console port by following the HyperTerminal procedure shown

next. Procedures using other serial communications programs should be similar.

1 Display menu 24.5 and enter “y” at the following screen.

Figure 241 System Maintenance: Backup Configuration

2 The following screen indicates that the Xmodem download has started.

Figure 242 System Maintenance: Starting Xmodem Download Screen

3 Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the

following screen.

Table 142 General Commands for GUI-based TFTP Clients

COMMAND DESCRIPTION

Host Enter the IP address of the Prestige. 192.168.1.1 is the Prestige’s default IP address

when shipped.

Send/Fetch Use “Send” to upload the file to the Prestige and “Fetch” to back up the file on your

computer.

Local File Enter the path and name of the firmware file (*.bin extension) or configuration file (*.rom

extension) on your computer.

Remote File This is the filename on the Prestige. The filename for the firmware is “ras” and for the

configuration file, is “rom-0”.

Binary Transfer the file in binary mode.

Abort Stop transfer of the file.

Ready to backup Configuration via Xmodem.

Do you want to continue (y/n):

You can enter ctrl-x to terminate operation any

time.

Starting XMODEM download...

1 2 ... 396 397 398 399 400 401 402 403 404 405 406 ... 562 563

Comentários a estes Manuais

Sem comentários

Zyxel-communications 662HW Series Manual do Utilizador Página 401

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications 662HW Series