Zyxel-communications 662HW Series Manual do Utilizador descarregar pdf (Página 278)

Prestige 662H/HW Series User’s Guide

Chapter 23 Media Bandwidth Management Advanced Setup 278

23.9 Configuring Class Setup

The class setup screen displays the configured bandwidth classes by individual interface.

Select an interface and click the buttons to perform the actions described next. Click “+” to

expand the class tree or click “-“ to collapse the class tree. Each interface has a permanent root

class. The bandwidth budget of the root class is equal to the speed you configured on the

interface (see the Configuring Summary section to configure the speed of the interface).

Configure child-class layers for the root class.

To add or delete child classes on an interface, click Media Bandwidth Management, then

Class Setup. The screen appears as shown (with example classes).

The example reserves 10 Mbps of unbudgeted bandwidth for traffic that is not defined in the

bandwidth filters (see the Reserving Bandwidth for Non-Bandwidth Class Traffic section ).

The Administration and Sales USA bandwidth classes each have bigger bandwidth budgets

than the total of the budgets of their child-classes. The child-classes can borrow the extra

bandwidth as long as they have bandwidth borrowing enabled (see the Bandwidth Borrowing

section ).

Table 85 Media Bandwidth Management: Summary

LABEL DESCRIPTION

LAN

WLAN

WAN

These read-only labels represent the physical interfaces. Select an interface’s check box

to enable bandwidth management on that interface. Bandwidth management applies to

all traffic flowing out of the router through the interface, regardless of the traffic’s source.

Traffic redirect or IP alias may cause LAN-to-LAN traffic to pass through the Prestige

and be managed by bandwidth management.

Active Select an interface’s check box to enable bandwidth management on that interface.

Speed (kbps) Enter the amount of bandwidth for this interface that you want to allocate using

bandwidth management.

This appears as the bandwidth budget of the interface’s root class. The recommendation

is to set this speed to match what the interface’s connection can handle. For example,

set the WAN interface speed to 1000 kbps if the ADSL connection has an upstream

speed of 1000 kbps.

Scheduler Select either Priority-Based or Fairness-Based from the drop-down menu to control

the traffic flow.

Select Priority-Based to give preference to bandwidth classes with higher priorities.

Select Fairness-Based to treat all bandwidth classes equally. .

Maximize

Bandwidth

Usage

Select this check box to have the Prestige divide up all of the interface’s unallocated

and/or unused bandwidth among the bandwidth classes that require bandwidth. Do not

select this if you want to reserve bandwidth for traffic that does not match a bandwidth

class or you want to limit the speed of this interface (see the Speed field description).

Back Click Back to go to the main Media Bandwidth Management screen.

Apply Click Apply to save your settings back to the Prestige.

Cancel Click Cancel to begin configuring this screen afresh.

1 2 ... 273 274 275 276 277 278 279 280 281 282 283 ... 562 563

Comentários a estes Manuais

Sem comentários

Zyxel-communications 662HW Series Manual do Utilizador Página 278

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications 662HW Series