Zyxel-communications NWA3550 Manual do Utilizador descarregar pdf (Página 125)

Chapter 9 MBSSID and SSID

NWA3550 User’s Guide

125

9.2 SSID

When the ZyXEL Device is set to Access Point, AP+Bridge or MBSSID mode, you need to

choose the SSID profile(s) you want to use in your wireless network (see Section 7.6 on page

98 for more information on operating modes).

Use the WIRELESS > SSID screen to see information about the SSID profiles on the ZyXEL

Device, and use the WIRELESS > SSID > Edit screen to configure the SSID profiles.

9.2.1 The SSID Screen

Click WIRELESS > SSID to display the screen as shown.

Select SSID Profile An SSID profile is the set of parameters relating to one of the ZyXEL Device’s

BSSs. The SSID (Service Set IDentifier) identifies the Service Set with which

a wireless station is associated. Wireless stations associating with the access

point (AP) must have the same SSID.

Note: If you are configuring the ZyXEL Device from a computer

connected to the wireless LAN and you change the

ZyXEL Device’s SSID or security settings, you will lose

your wireless connection when you press Apply to

confirm. You must then change the wireless settings of

your computer to match the ZyXEL Device’s new

settings.

Index This is the index number of the SSID profile.

Active Select the check box to activate an SSID profile.

Profile Select the profile(s) of the SSIDs you want to use in your wireless network.

You can have up to eight BSSs running on the ZyXEL Device simultaneously,

one of which is always the pre-configured VoIP_SSID profile and another of

which is always the pre-configured Guest_SSID profile.

Configure SSID profiles in the SSID screen.

Enable Spanning Tree

Control (STP)

(R)STP detects and breaks network loops and provides backup links between

switches, bridges or routers. It allows a bridge to interact with other (R)STP -

compliant bridges in your network to ensure that only one path exists between

any two stations on the network. Select the check box to activate STP on the

ZyXEL Device.

Enable Roaming Roaming allows wireless stations to switch from one access point to another

as they move from one coverage area to another. Select this checkbox to

enable roaming on the ZyXEL Device if you have two or more ZyXEL Devices

on the same subnet.

Note: All APs on the same subnet and the wireless stations

must have the same SSID to allow roaming.

Apply Click Apply to save your changes.

Reset Click Reset to begin configuring this screen afresh.

Table 34 Wireless: Multiple BSS

LABEL DESCRIPTION

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 343 344

Comentários a estes Manuais

Sem comentários

Zyxel-communications NWA3550 Manual do Utilizador Página 125

Comentários a estes Manuais

Manuais e produtos relacionados com Hardware Zyxel-communications NWA3550