Zyxel-communications NWA3550 Manual do Utilizador descarregar pdf (Página 127)

Chapter 9 MBSSID and SSID

NWA3550 User’s Guide

127

9.2.2 Configuring SSID

Each SSID profile references the settings configured in the following screens:

• WIRELESS > Security (one of the security profiles).

• WIRELESS > RADIUS (one of the RADIUS profiles).

• WIRELESS > MAC Filter (the MAC filter list, if activated in the SSID profile).

• WIRELESS > Layer 2 Isolation (the layer 2 isolation list, if activated in the SSID

profile).

• Also, use the VLAN screen to set up wireless VLANs based on SSID.

Configure the fields in the above screens to use the settings in an SSID profile.

Select an SSID profile in the WIRELESS > SSID screen and click Edit to display the

following screen.

Figure 68 Configuring SSID

The following table describes the labels in this screen.

Table 36 Configuring SSID

LABEL DESCRIPTION

Profile Name Enter a name identifying this profile.

SSID When a wireless client scans for an AP to associate with, this is the name that

is broadcast and seen in the wireless client utility.

Hide Name (SSID) Select Disable if you want the ZyXEL Device to broadcast this SSID (a

wireless client scanning for an AP will find this SSID). Alternatively, select

Enable to have the ZyXEL Device hide this SSID (a wireless client scanning

for an AP will not find this SSID).

Security Select a security profile to use with this SSID profile. See Section 8.3 on page

111 for more information.

RADIUS Select a RADIUS profile from the drop-down list box, if you have a RADIUS

server configured. If you do not need to use RADIUS authentication, ignore

this field. See Section 8.5 on page 119 for more information.

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 343 344

Sem comentários

Zyxel-communications NWA3550 Manual do Utilizador Página 127