Zyxel-communications NWA3550 Manual do Utilizador Página 168

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 167
Chapter 13 Remote Management Screens
NWA3550 User’s Guide
168
Confirm
Password
Re-enter the Password.
Access Type For the administrator, this is always Set. SNMP Set commands allow the
administrator to make configuration changes.
Authentication
Protocol
Select an authentication algorithm. MD5 (Message Digest 5) and SHA (Secure
Hash Algorithm) are hash algorithms used to authenticate SNMP data. SHA
authentication is generally considered stronger than MD5, but is slower.
Privacy Protocol Specify the encryption method for SNMP communication with this user. You can
choose one of the following:
DES - Data Encryption Standard is a widely used (but breakable) method of
data encryption. It applies a 56-bit key to each 64-bit block of data.
AES - Advanced Encryption Standard is another method for data encryption
that also uses a secret key. AES applies a 128-bit key to 128-bit blocks of
data.
None - no encryption is used.
Enable
SNMPv3User
Select this box to activate the SNMPv3 user account. The SNMPv3 user can
issue GET commands to the ZyXEL Device.
User Name Enter a username for the SNMPv3 user. Only SNMP commands carrying this
username are allowed to get details about the ZyXEL Device.
Password Enter a password for the SNMPv3 administrator. Only SNMP commands
carrying this password are allowed to get details about the ZyXEL Device.
Confirm
Password
Re-enter the Password.
Access Type For the administrator, this is always Get. SNMP Get commands allow the user
to make see configuration details about the ZyXEL Device.
Authentication
Protocol
Select an authentication algorithm. MD5 (Message Digest 5) and SHA (Secure
Hash Algorithm) are hash algorithms used to authenticate SNMP data. SHA
authentication is generally considered stronger than MD5, but is slower.
Privacy Protocol Specify the encryption method for SNMP communication with this user. You can
choose one of the following:
DES - Data Encryption Standard is a widely used (but breakable) method of
data encryption. It applies a 56-bit key to each 64-bit block of data.
AES - Advanced Encryption Standard is another method for data encryption
that also uses a secret key. AES applies a 128-bit key to 128-bit blocks of
data.
None - no encryption is used.
Apply Click Apply to save your customized settings and exit this screen.
Reset Click Reset to begin configuring this screen afresh.
Table 53 Remote Management: SNMP User Profile
LABEL DESCRIPTION
Vista de página 167
1 2 ... 163 164 165 166 167 168 169 170 171 172 173 ... 343 344

Comentários a estes Manuais

Sem comentários