Zyxel-communications Omni TA128 Manual do Utilizador descarregar pdf (Página 31)

Use “A/” to repeat the last command. No ‘AT’ prefix is needed for

this command.

The TA128 supports either verbose result code (i.e. “OK”) or

numerical result code (i.e. “0"). You can use ATVn command to

set it one way or the other:

Command Description

ATV0 Select numerical result code.

ATV1 Select verbose result code.

Outgoing Calls

The TA128 has 3 modes in which to send communication over

ISDN network.

• ISDN data.

• Analog port, Phone 1 communication.

• Analog port, Phone 2 communication.

These modes are auto-switching based on the commands you

issue. Let’s take a look at how the communication mode is

automatically switched. At your terminal program, proceed with

the following instructions:

Dialing out using ISDN mode

The command “ATDI” tells your TA128 that you want to make an

ISDN data call and to therefore use the ISDN mode to call out.

Type:

ATDI17142630398<enter> (Make an ISDN call)

Dialing out using ISDN mode’s optional Speech Bearer

Service

TA128 supports ISDN data utilizing Speech Bearer Service. To

enable this function, you need to set S-register S83 bit 7 to 1

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 172 173

Sem comentários

Zyxel-communications Omni TA128 Manual do Utilizador Página 31