Zyxel-communications Omni TA128 Manual do Utilizador descarregar pdf (Página 88)

S108.n= Function

S80.n=0 Disable outgoing Low-Layer-Compatibility (default).

S80.n=1 Enable outgoing Low-Layer-Compatibility.

Example: ATS80.4=0 disables Low-Layer-Compatibility message

for Analog Port 2.

Control of ISDN Phone Number and Sub-address

The Calling-Party-Number information element identifies the origin

of a call, and the Called-Party-Number information element

identifies the destination of a call.

The Calling-Party-Subaddress information element identifies the

Subaddress associated with the origin of a call.

The Called-Party-Subaddress information identifies the Subaddress

of the destination call.

Each type of outgoing call can be assigned with one

Number/Subaddress pair by using the command AT&ZOx=s. The

possible values for x are as follows:

• x = I - for ISDN data calls.

• x = A - for the analog adapter 1.

• x = B - for the analog adapter 2.

The number-Subaddress-string ‘s’ is defined as:

s = [[Yn][Nn]own-number][/[[Zn]own-Subaddress]/]

where Yn specifies the number type:

• Y0 - unknown (default if Yn is omitted).

• Y1 - international number.

• Y2 - national number.

• Y3 - network specific number.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 172 173

Sem comentários

Zyxel-communications Omni TA128 Manual do Utilizador Página 88