ZyXEL Communications VSG1432 Guia do Utilizador Página 288

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 287
Chapter 28 Remote Management
VSG1432-B101 Series User’s Guide
288
Click Maintenance > Remote Management > TR-069 Client to open the
following screen. Use this screen to configure your ZyXEL Device to be managed
by an ACS.
Figure 134 Maintenance > Remote Management > TR-069 Client
The following table describes the fields in this screen.
Table 105 Maintenance > Remote Management > TR-069 Client
LABEL DESCRIPTION
Inform Select Enable for the ZyXEL Device to send periodic inform via TR-069
on the WAN. Otherwise, select Disable.
Inform Interval Enter the time interval (in seconds) at which the ZyXEL Device sends
information to the auto-configuration server.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-
configuration server.
ACS Password Enter the TR-069 password for authentication with the auto-
configuration server.
WAN Interface
used by TR-069
client
Select a WAN interface through which the TR-069 traffic passes.
If you select Any_WAN, you should also select the pre-configured
WAN connection(s).
Display SOAP
messages on
serial console
Select Enable to show the SOAP messages on the console.
Connection
Request
Authentication
Select this option to enable authentication when there is a connection
request from the ACS.
Connection
Request User
Name
Enter the connection request user name.
When the ACS makes a connection request to the ZyXEL Device, this
user name is used to authenticate the ACS.
Vista de página 287
1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 407 408

Comentários a estes Manuais

Sem comentários