ZyXEL Communications 1 Guia do Utilizador Página 212

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 211
17-10 Firmware and Configuration Maintenance
Restore Using FTP or TFTP Session Example
Figure 17-8 Restore Using FTP or TFTP Session Example
Refer to the TFTP and FTP over WAN Will Not Work When section to read about configurations that
disallow TFTP and FTP to work over WAN.
17.3.2 Restore Via Console Port
Restore configuration via console port by following the HyperTerminal procedure shown next. Procedures
using other serial communications programs should be similar.
Step 22. Display menu 24.6 and enter “y” at the following screen.
Figure 17-9 System Maintenance — Restore Configuration
Step 4. The following screen indicates that the Xmodem download has started.
Figure 17-10 System Maintenance — Starting Xmodem Download Screen
Step 5. Run the HyperTerminal program by clicking Transfer, then Receive File as shown in the
following screen.
ftp> put config.rom rom-0
200 Port command okay
150 Opening data connection for STOR rom-0
226 File received OK
221 Goodbye for writing flash
ftp: 16384 bytes sent in 0.06Seconds 273.07Kbytes/sec.
ftp>quit
Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):
Starting XMODEM download (CRC mode) ...
CCCCCCCCC
Vista de página 211
1 2 ... 207 208 209 210 211 212 213 214 215 216 217 ... 284 285

Comentários a estes Manuais

Vikicmj 04 Jan 2024 | 10:44:24

urenrjrjkvnm

Evalyw 07 Jan 2024 | 13:35:47

Med

Viktorimky 13 Jan 2024 | 22:28:53

Cinema