ZyXEL Communications 1 Guia do Utilizador Página 214

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
Vista de página 213
17-12 Firmware and Configuration Maintenance
WARNING!
DO NOT INTERUPT THE FILE TRANSFER PROCESS AS THIS MAY
PERMANENTLY DAMAGE YOUR PRESTIGE.
17.4.1 Firmware File Upload
FTP is the preferred method for uploading the firmware and configuration. To use this feature, your
computer must have an FTP client.
When you telnet into the Prestige, you will see the following screens for uploading firmware and the
configuration file using FTP.
Figure 17-13 Telnet Into Menu 24.7.1 — Upload System Firmware
17.4.2 Configuration File Upload
You see the following screen when you telnet into menu 24.7.2.
Menu 24.7.1 - System Maintenance - Upload System Firmware
To upload the system firmware, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the name
of your firmware upgrade file on your workstation and "ras" is the
remote file name on the system.
4. The system reboots automatically after a successful firmware upload.
For details on FTP commands, please consult the documentation of your FTP
client program. For details on uploading system firmware using TFTP (note
that you must remain on this menu to upload system firmware using TFTP),
please see your manual.
Press ENTER to Exit:
Vista de página 213
1 2 ... 209 210 211 212 213 214 215 216 217 218 219 ... 284 285

Comentários a estes Manuais

Vikicmj 04 Jan 2024 | 10:44:24

urenrjrjkvnm

Evalyw 07 Jan 2024 | 13:35:47

Med

Viktorimky 13 Jan 2024 | 22:28:53

Cinema