
NSA-2400 User’s Guide
Chapter 1 Getting to Know Your NSA 22
1.2 NSA Features
This section lists the main physical and firmware features of the NSA.
1.2.1 Physical Features
These are the main external physical features.
Gigabit Ethernet Port
The 10/100/1000 Mbps auto-negotiating Ethernet port allows the NSA to detect the speed of
incoming transmissions and adjust appropriately without manual intervention. It allows data
transfer of either 100 Mbps or 1000 Mbps in either half-duplex or full-duplex mode depending
on your Ethernet network. Use an 8-wire Ethernet cable for Gigabit connections. The port is
also auto-crossover (MDI/MDI-X) meaning it automatically adjusts to either a crossover or
straight-through Ethernet cable.
USB Ports
Expand storage capacity by attaching compatible USB (version 2) hard drives to the USB
ports.
SATA Interface
Serial ATA is a low cost interface technology that allows high speed data transfer. Serial ATA
also allows more efficient internal airflow and also smaller chassis design.
Reset Button
If you forget your (admin) password, then use the reset button to restore the factory default
password to “1234” (with user name “admin”), default IP address to 192.168.1.3 and subnet
mask of 255.255.255.0. (Alternatively, you can use the web configurator ‘forget password’
feature.)
BIOS Reset Button
This button is for service personnel only. It is used to reset the BIOS settings to the ZyXEL
default settings in the event the CMOS battery inside the NSA expires. This battery should not
lose power for many years unless there's a battery failure or the NSA has been left powered off
for an extended period of time.
1.2.2 Firmware Features
These are some of the main firmware features of the NSA.
Comentários a estes Manuais