
NSA-2400 User’s Guide
81 Chapter 6 Storage
6.3 Volumes
On an NSA, a volume is a storage area on a single disk or spread across a number of disks
within a single file system. How you spread data across disks depends on if you use a RAID
(Redundant Array of Independent Disks) method or SINGLE.
Note: All data is deleted if you re-create a volume.
You can specify volumes on the internal disks and external disks attached to the USB port(s).
• If you have four disks and are using RAID 5, then you can have one volume on the NSA
(RAID 5 uses all fours disks for data parity and striping).
• If you have four disks and are using RAID 1, then you can have two volumes (you need
to use two disks to create one RAID 1 volume on the NSA). You could also use RAID 1
on two disks and RAID 0
1
on the other two allowing you to have three volumes.
• Finally you could use RAID 0 or SINGLE on all four disks allowing you to have up to
four volumes.
• You can configure SINGLE or Backup on external USB disks. Choose Backup if you
intend to use the backup utility to copy data from the NSA internal drives to the external
USB drive. Before backup begins, the NSA first checks the drive for disk space and then
scans for file system errors.
Note: You can spread a volume across internal disks but not between internal and
external disks.
6.3.1 RAID
Redundant Array of Independent Disks (RAID) is a method of storing data on multiple disks
to provide a combination of greater capacity, reliability, or speed.
The RAID levels supported on the NSA are:
Status This field displays OK if the (physical) disk is readable and Down if no
data can be read from it. if Down, the disk may need to be scanned for
errors or replaced. If it needs to be repaired or replaced, then you will have
to resynchronize the volume.
Snapshot You can see information on snapshots you created on the NSA here.
Table 27 Storage > Overview (continued)
LABEL DESCRIPTION
1. Not available at the time of writing.
Comentários a estes Manuais