ZyXEL Communications G-102 Guia do Utilizador descarregar pdf (Página 103)

ZyXEL G-1000 v2 User’s Guide

Chapter 12 LAN Setup 103

Figure 51 Menu 3.5.1 WLAN MAC Address Filter

The following table describes the fields in this menu.

12.3.2 Configuring Roaming

Enable the roaming feature if you have two or more G-1000 v2s on the same subnet. Follow

the steps below to allow roaming on your G-1000 v2.

1 From the main menu, enter 3 to display Menu 3 – LAN Setup.

2 Enter 5 to display Menu 3.5 – Wireless LAN Setup.

Menu 3.5.1 - WLAN MAC Address Filter

Active= No

Filter Action= Allowed Association

------------------------------------------------------------------------------

1= 00:00:00:00:00:00 13= 00:00:00:00:00:00 25= 00:00:00:00:00:00

2= 00:00:00:00:00:00 14= 00:00:00:00:00:00 26= 00:00:00:00:00:00

3= 00:00:00:00:00:00 15= 00:00:00:00:00:00 27= 00:00:00:00:00:00

4= 00:00:00:00:00:00 16= 00:00:00:00:00:00 28= 00:00:00:00:00:00

5= 00:00:00:00:00:00 17= 00:00:00:00:00:00 29= 00:00:00:00:00:00

6= 00:00:00:00:00:00 18= 00:00:00:00:00:00 30= 00:00:00:00:00:00

7= 00:00:00:00:00:00 19= 00:00:00:00:00:00 31= 00:00:00:00:00:00

8= 00:00:00:00:00:00 20= 00:00:00:00:00:00 32= 00:00:00:00:00:00

9= 00:00:00:00:00:00 21= 00:00:00:00:00:00

10= 00:00:00:00:00:00 22= 00:00:00:00:00:00

11= 00:00:00:00:00:00 23= 00:00:00:00:00:00

12= 00:00:00:00:00:00 24= 00:00:00:00:00:00

------------------------------------------------------------------------------

Enter here to CONFIRM or ESC to CANCEL:

Table 43 Menu 3.5.1 WLAN MAC Address Filter

FIELD DESCRIPTION

Active To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER].

Filter Action Define the filter action for the list of MAC addresses in the MAC address filter table.

To deny access to the G-1000 v2, press [SPACE BAR] to select Deny Association and

press [ENTER]. MAC addresses not listed will be allowed to access the router.

The default action, Allowed Association, permits association with the G-1000 v2. MAC

addresses not listed will be denied access to the router.

MAC Address Filter

1..32 Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are

allowed or denied access to the G-1000 v2 in these address fields.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to

save your configuration or press [ESC] to cancel and go back to the previous screen.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 197 198

Sem comentários

ZyXEL Communications G-102 Guia do Utilizador Página 103