ZyXEL Communications G-102 Guia do Utilizador descarregar pdf (Página 164)

ZyXEL G-1000 v2 User’s Guide

164

Log Commands

Go to the command interpreter interface (the Command Interpreter Appendix explains how to access

and use the commands).

3 Port unreachable

4 A packet that needed fragmentation was dropped because it was set to Don't Fragment

(DF)

5 Source route failed

4 Source Quench

0 A gateway may discard internet datagrams if it does not have the buffer space needed

to queue the datagrams for output to the next network on the route to the destination

network.

5 Redirect

0 Redirect datagrams for the Network

1 Redirect datagrams for the Host

2 Redirect datagrams for the Type of Service and Network

3 Redirect datagrams for the Type of Service and Host

8 Echo

0 Echo message

11 Time Exceeded

0 Time to live exceeded in transit

1 Fragment reassembly time exceeded

12 Parameter Problem

0 Pointer indicates the error

13 Timestamp

0 Timestamp request message

14 Timestamp Reply

0 Timestamp reply message

15 Information Request

0 Information request message

16 Information Reply

0 Information reply message

Table 82 Sys log

LOG MESSAGE DESCRIPTION

Mon dd hr:mm:ss hostname

src="<srcIP:srcPort>"

dst="<dstIP:dstPort>"

msg="<msg>" note="<note>"

This message is sent by the "RAS" when this syslog is generated. The

messages and notes are defined in this appendix’s other charts.

Table 81 ICMP Notes (continued)

TYPE CODE DESCRIPTION

1 2 ... 159 160 161 162 163 164 165 166 167 168 169 ... 197 198

Comentários a estes Manuais

Sem comentários

ZyXEL Communications G-102 Guia do Utilizador Página 164

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ZyXEL Communications G-102