ZyXEL Communications G-102 Guia do Utilizador descarregar pdf (Página 43)

ZyXEL G-1000 v2 User’s Guide

Chapter 3 Wizard Setup 43

The following table describes the labels in this screen.

Note: The wireless stations and G-1000 v2 must use the same SSID, channel ID and

WEP encryption key (if WEP is enabled) or WPA-PSK (if WPA-PSK is enabled)

for wireless communication.

3.3.2 Configuring WEP or WPA(2) PSK Security

Choose Basic (WEP) security to setup WEP Encryption parameters.

Table 9 Enter Name and Select Security

LABEL DESCRIPTION

Wireless LAN Setup

Name(SSID) Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the

wireless LAN.

If you change this field on the G-1000 v2, make sure all wireless stations use

the same SSID in order to access the network.

Choose Channel ID To manually set the G-1000 v2 to use a specific channel, select a channel from

the drop-down list box.

Security The level of Security can be selected as none, basic or extended. Choose

None security to have no wireless LAN security configured and proceed to the

“Apply Settings” on page 47 section.

Choose Basic (WEP) security if you want to configure WEP Encryption

parameters.

Choose Extend (WPA-PSK with customized key) or Extend (WPA2-PSK

with customized key) security to configure a Pre-Shared Key.

The next screen varies depending on which security level you select.

Back Click Back to return to the previous screen.

Next Click Next to continue.

Exit Click Exit to quit the wizard without saving the changes.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 197 198

Sem comentários

ZyXEL Communications G-102 Guia do Utilizador Página 43