ZyXEL Communications G-102 Guia do Utilizador descarregar pdf (Página 68)

ZyXEL G-1000 v2 User’s Guide

68 Chapter 6 Remote Management Configuration

• The IP address in the Secured Client IP field does not match the client IP address. If it

does not match, the G-1000 v2 will disconnect the session immediately.

• There is already another remote management session with an equal or higher priority

running. You may only have one remote management session running at one time.

• There is a firewall rule that blocks it.

6.1.2 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).

The G-1000 v2 automatically logs you out if the management session remains idle for longer

than this timeout period. The management session does not time out when a statistics screen is

polling.

6.2 WWW

To change your G-1000 v2’s World Wide Web settings, click Advanced > Remote MGMT

to display the WWW screen.

Figure 24 Remote Management: WWW

The following table describes the labels in this screen.

Table 25 Remote Management: WWW

LABEL DESCRIPTION

Port You may change the server port number for a service if needed, however you must

use the same port number in order to use that service for remote management.

Server Access Select the interface(s) through which a computer may access the G-1000 v2 using

this service.

Secured Client IP

Address

A secured client is a “trusted” computer that is allowed to communicate with the G-

1000 v2 using this service.

Select All to allow any computer to access the G-1000 v2 using this service.

Choose Selected to just allow the computer with the IP address that you specify to

access the G-1000 v2 using this service.

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 197 198

Sem comentários

ZyXEL Communications G-102 Guia do Utilizador Página 68