ZyXEL Communications Omni 288S Manual do Utilizador descarregar pdf (Página 10)

novaPro32 Routel

General

7000991003 Q2

Sauter Systems

1.4 Recommendations concerning

modems

The Routel and novaPro32 (via Windows) basically support all modems, as well as any

other switched DCE devices (data communication equipment) such as ISDN terminal

adaptor, GSM phones, switched radio modem, etc., as long as these devices are

controlled by character strings (e.g. AT commands).

The proper control strings to be configured for these devices have to be worked out from

the documentation of these units.

The following modems have been tested by SBA and are thus recommended for

standard telephone connections:-

• 3Com/US-Robotics (e.g. 56k message modem)

• Olitec (e.g. Speedcom 2000)

• ZyXel (e.g. Omni 288S)

This manual is based on the use of these modems, and all proper parameters for

them are listed in the sections concerned.

We strongly advise against using modems of internet starter kits, or so-called

Internet modems. These modems are often configured fixed for the use with a

particular provider and often there is no documentation available, which makes a

successful application within a Routel installation impossible.

Furthermore, we advise you to use identical modem types within any modem link

(i.e. within a project).

1.5 Recommendations concerning

Windows

Since novaPro32 will be running permanently on the Supervision PC, we strongly

recommend you to use WIN-NT-SP6 or WIN2000 as the operating system for this

PC. The WIN98 operating system is not suitable for long-term operation.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 33 34

Sem comentários

ZyXEL Communications Omni 288S Manual do Utilizador Página 10