ZyXEL Communications Omni 288S Manual do Utilizador descarregar pdf (Página 14)

novaPro32 Routel

Routel set-up

7000991003 Q2

Sauter Systems

Open the ‘501120_001e.bin’ file:-

The parameters displayed are the factory default parameters.

The following parameters have to be set according to your project:-

Project ID

- The ID of your project (e.g. from your BMTL export file or from the registry)

AS Network ID

- The ID of the AS network concerned (e.g. from your BMTL export file or from the

registry)

PC address

- For the Routel islands to work properly, the PC address has to be set to:-

PC-Address=32512+nx4

where n is 0 for the first island of this project, 1 for second and so on.

- If you have more than one Routel on the same island, the PC address for the

second PC (Routel) has to be: the one of the first one + 1, for the third: the one of

the first + 2 ...

- Important: These rules must be strictly observed.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 33 34

Sem comentários

ZyXEL Communications Omni 288S Manual do Utilizador Página 14