ZyXEL Communications X6004 Guia do Utilizador descarregar pdf (Página 24)

Chapter 3 Network Commands

X6004 CLI Reference Guide

3.4 Static Routes Commands

This section describes the commands used to configure static routes on the X6004.

The following table lists the commands for this feature

3.4.1 Static Routes Command Examples

This example:

• Adds the static route 192.168.2.0 with network mask 255.255.255.0 for the LAN

interface.

• Displays static routes.

Table 8 Static Route Commands

COMMAND

DESCRIPTION

network route add net <ip-address> mask

<subnet-mask> gw <ip-address> dev

Adds a static route entry for the specified interface of the

X6004.

Note: At the time of writing only LAN is allowed.

network route del net IPv4 mask IPv4Mask

gw IPv4 dev <interface>

Deletes an existing static route entry.

network route show all Displays all static routes configured on the X6004.

> network route add net 192.168.2.0 mask 255.255.255.0 gw 192.168.1.254 dev

LAN

> network route show all

Network Subnet Mask Gateway IPNetwork Interface

192.168.2.0 255.255.255.0 192.168.1.254 LAN

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 117 118

Sem comentários

ZyXEL Communications X6004 Guia do Utilizador Página 24