ZyXEL Communications X6004 Guia do Utilizador descarregar pdf (Página 64)

Chapter 11 Outbound Dial Rule (LCR) Commands

X6004 CLI Reference Guide

11.1.1 LCR Command Examples

This example:

• Creates an LCR called VoIPCalls with the comment LCR for VoIP calls, no limit on call

time and the outbound line group ITSP (the outbound line group must be preceded by the

machine ID of X6004 - this is IPPBX_001, if you are not using a ZyStack, otherwise the

last digit changes depending on when the X6004 was added to the ZyStack.

• Creates a dial condition 0. (the period (.) is a wildcard indicating that any number can

follow the 0 in order to match this dial condition).

• Creates an offset value of 1 for this LCR.

• Displays configuration details of VoIPCalls.

pbx outbound lcr set name <name> dialcond

<dialcond> channel <channel> offset

Sets the offset for a dial condition. The offset is the number

of digits that the X6004 strips off of the beginning of a

dialed number when this dial condition is used.

pbx outbound lcr set name <name> dialcond

<dialcond> channel <channel> offset

<offset> length <length> prefix <prefix>

postfix <postfix>

Specifies all the settings for a dial condition.

pbx outbound lcr set name <name> dialcond

<dialcond> channel <channel> postfix

Sets the postfix for a dial condition. The postfix is the string

of digits the X6004 adds to the end of a dialed number

when this dial condition is used.

pbx outbound lcr set name <name> dialcond

<dialcond> channel <channel> prefix

Sets the prefix for a dial condition. The prefix is the string of

digits the X6004 adds to the beginning of a dialed number

when this dial condition is used.

pbx outbound lcr show all Displays all LCRs created on the X6004.

pbx outbound lcr show name <name> Displays configuration details of an LCR.

pbx outbound lcr show name <name>

dialcond <dialcond>

Displays the channels to which a dial condition applies for a

specified LCR.

Table 30 LCR Commands (continued)

COMMAND DESCRIPTION

> pbx outbound lcr add name VoIPCalls comment "LCR for VoIP calls"

maxcalltime 0 channel IPPBX_001:ITSP:

> pbx outbound lcr set name VoIPCalls add dialcond 0.

> pbx outbound lcr set name VoIPCalls dialcond 0. channel IPPBX_001:ITSP:

offset 1

> pbx outbound lcr show name VoIPCalls

VoIPCalls

comment : LCR for VoIP calls

max call time : 0

channel sequence: IPPBX_001:ITSP:

dial condition list : 0.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 117 118

Comentários a estes Manuais

Sem comentários

ZyXEL Communications X6004 Guia do Utilizador Página 64

Comentários a estes Manuais