
Chapter 20 Diagnostics Commands
X6004 CLI Reference Guide
92
20.2 Network Diagnostic Commands
The following table describes commands related to the network diagnostic functions on the
X6004.
20.3 PBX Diagnostics Commands
The following table describes commands related to the PBX diagnostic functions on the
X6004.
Table 48 Network Diagnostics Commands
COMMAND DESCRIPTION
diag show arp_table [mid <mid>] Displays the ARP table on the X6004. Optionally, on the
specified X6004.
diag show ip_route [mid <mid>] Displays the static routes configured on the X6004.
Optionally, on the specified X6004.
diag ping <ip-address|host-name> [mid
<mid>]
Executes a ping command to the specified network device.
Optionally, from the specified X6004.
diag traceroute <ip-address|host-name>
[mid <mid>]
Executes a traceroute command to the specified network
device. Optionally, from the specified X6004.
Table 49 PBX Diagnostics Commands
COMMAND DESCRIPTION
diag dial <peer_num> <peer_num> [mid
<mid>]
Tests a connection between the specified extension
numbers. Optionally, specifying which IPPBX the call
should go through.
diag pbx show channels [mid <mid>] Displays information about active outbound line groups
configured on the X6004. Optionally, on the specified
X6004.
diag pbx show hunts [mid <mid>] Displays hunt group status information. Optionally, on the
specified X6004.
diag pbx show parkedcall [mid <mid>] Displays status information about parked calls. Optionally,
on the specified X6004.
diag pbx show autocallback [mid <mid>] Displays status information about auto callback. Optionally,
on the specified X6004.
diag pbx show reg_peers [mid <mid>] Displays status information about SIP trunks configured on
the X6004. Optionally, on the specified X6004.
diag pbx show peer_detail <extension>
[mid <mid>]
Displays status details about a SIP extension configured on
the X6004. Optionally, on the specified X6004.
diag pbx show database status [mid <mid>] Displays status information for the SIP extension database.
diag pbx show database db <sip|extension>
[mid <mid>]
Displays the SIP or Extension table on the
X6004.Optionally, on the specified X6004.
diag pbx show meetme roomnum
<conference_room_number> [mid <mid>]
Displays status information about a meet-me conference
specified by the conference room number. Optionally, on
the specified X6004.
diag pbx show sip_trunk status [mid
<mid>]
Displays registration status of the SIP trunks configured on
the X6004. Optionally, on the specified X6004.
Comentários a estes Manuais