ZyXEL Communications X6004 Guia do Utilizador descarregar pdf (Página 35)

X6004 CLI Reference Guide

CHAPTER 6

QoS Commands

This chapter shows you how to configure QoS settings via commands.

6.1 QoS Commands

The following table describes commands related to the Quality of Service (QoS) feature on the

X6004. Refer to your network administrator or service provider for information on how to

mark outgoing VoIP packets.

6.1.1 QoS Command Examples

This example:

• Configures the X6004 to mark outgoing VoIP packets with Expedited Forwarding (EF)

DiffServ Code Point.

• Displays QoS settings.

Table 15 QoS Commands

COMMAND DESCRIPTION

pbx server qos set ds <ds> Sets the QoS setting to DiffServ and specifies the DSCP

value.

ds: possible values include assured forwarding group

(af11, af12, af13, af21, af22, af23, af31, af32,

af33, af41, af43, af43), expedited forwarding point

(ef), and class selector group(cs1, cs2, cs3, cs4, cs5,

cs6, cs7).

pbx server qos set none Sets the QoS setting to none.

pbx server qos set tos <tos> Sets the QoS setting to ToS and specifies the ToS value.

tos: mincost|reliability|throughput|lowdelay. Network

administrators typically use lowdelay for VoIP traffic.

pbx server qos set user <qos-value> Sets the QoS setting to user defined and specifies the

value.

qos-value: 0~255

pbx server qos show Shows the QoS configuration settings.

> pbx server qos set ds ef

> pbx server qos show

qos type=ds,qos value=ef

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 117 118

Sem comentários

ZyXEL Communications X6004 Guia do Utilizador Página 35