Zyxel-communications U-336SA Manual do Utilizador descarregar pdf (Página 28)

14 Basic Modem Operation

Using the Windows 95 Hyper Terminal

Program

In order to issue an AT command statement, you first need to run a

communication program such as the Microsoft Windows “Hyper

Terminal” program. This program provides a simple method to manually

enter AT commands so you can do such things as “customize” the

settings of your modem, or store commonly used phone numbers.

Once your modem is connected to your computer’s serial port and

telephone line, open the Windows 95 “Accessories” program group,

and open the Hyper Terminal Program.

The program will prompt you for a name and Icon to use for your new

connection. Type the name Test Connection and press <Enter>.

Next, you will be prompted for country information, area code and

phone number, and the device used to make the connection. For this

test purpose, do not enter a phone number; simply choose the COM

port your modem is connected to from the “Connect Using” list. Click

“OK” when finished.

The next window sets the COM port settings. The settings used for

your modem should be as follows.

Bits per second: 57600

Data bits: 8

Parity: None

Stop bits: 1

Flow Control: Hardware

Click “OK” when finished. After you have done this, save your new

connection by selecting “Save” from the “File” menu and click “OK.” A

new connection icon will be added to your Hyper Terminal folder.

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 160 161

Sem comentários

Zyxel-communications U-336SA Manual do Utilizador Página 28