Zyxel-communications U-336SA Manual do Utilizador Página 48

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 161
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 47
34 LCD Panel Operation
Equivalent AT Commands:
ATD1234567 Dial phone number.
Manual Dial
Use of a telephone set to make a call, in which case an answer tone
comes back, is normally called Manual Dial. Once the other side
answers, access O (Originate) by using the left or right arrow key so the
blinking cursor settles on the O. Then press the ENTER key to start the
modem handshaking sequence.
Equivalent AT Commands:
ATD Go on-line in Originate mode.
When dialing a person, use the telephone to make the call. When
someone on the other side answers, decide who will be the Originate
modem and who will be the Answer modem. Once an agreement is
reached, use the left or right arrow key to select the O or A for
Originate or Answer. Then press the ENTER key to start the modem
handshaking sequence.
Equivalent AT Commands:
ATD Go on-line in Originate mode.
ATA Go on-line in Answer mode.
When you want to switch from modem to voice communication, simply
lift up the handset of both sides and press the ENTER key while the
blinking cursor is on the H or Hang Up. The LCD display will show
DISCONNECTING? to ask for a confirmation. Press ENTER again
and the modem will change from data to voice communication. When
both sides wish to return to data communication, one side should press
O while the other side presses A (as explained previously). This
Vista de página 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 160 161

Comentários a estes Manuais

Sem comentários