Zyxel-communications U-336SA Manual do Utilizador descarregar pdf (Página 83)

Fax Operation 69

Command Value Description

+FBADLIN=

<value>

0-255 Bad line threshold (number of

consecutive bad lines for a bad page

parameter):

Determine if Copy Quality OK on the

T.30 flow chart . <value>=0 to 255; a

value of 0 implies that error checking is

disabled.

+FBOR=n Phase C data bit order:

n=0 Select direct bit order.

n=1 Select reversed bit order in receiving

mode for phase C data.

+FBUF? Buffer size; read only parameter:

Allow DTE to determine the

characteristics of the DCE’s buffer size.

+FCIG="string" Local fax station ID string, for polling Rx.

+FCLASS=n Service class selection: Refer to

+FCLASS Class 1 command in previous

section.

+FCON DCE responds fax connection .

+FCQ=n Copy quality check capability parameter

n=0 No copy quality check capability.

n=1 Only check 1D phase C data.

n=2 Check both 1D and 2D phase C data.

+FCR=n "Capability to receive" parameter

n=0 DCE will not receive message data or

poll a remote device.

n=1 DCE receives message data or polls a

remote device.

+FDCC=vr,br,wd

,ln,df,ec,bf,st

DCE capabilities parameters.

vr=0 Vertical resolution: Normal; 98 lpi.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 160 161

Sem comentários

Zyxel-communications U-336SA Manual do Utilizador Página 83