Zyxel-communications U-336SA Manual do Utilizador descarregar pdf (Página 69)

Special Functions 55

There are two kinds of caller information message formats sent by the

phone company.

• One is the single message format which includes date, time, and

caller ID

• The other is the multiple message format which also includes the

caller name as registered with the phone company.

The command ATS40.2=n is used to enable (n=1) or disable (n=0)

the Caller ID detection function. The default is disabled. Enable it only

when you have this service and want to enable its detection.

ONOTE: THE CALLER ID MESSAGE MAY CAUSE SOME COMMUNICATION SOFTWARE THAT

IS NOT EXPECTING IT TO BECOME CONFUSED. IF YOU PLAN TO USE THE

CALLER ID FEATURE, BE SURE YOU ARE USING SOFTWARE THAT SUPPORTS IT

(SUCH AS ZFAX).

In single message format, the modem will send a ring message to the

terminal as follows:

RING

TIME: <MM-DD hh:mm>

CALLER NUMBER: <CALLER_ID> or CALLER

NAME:<CALLER_NM>

RING

MM is the two-digit month message, DD is the two-digit date message,

hh is the hour and mm is the minute of the time, and CALLER_ID is the

phone number of the caller or CALLER_NM his/her name.

The following is an example of a caller ID message as it might appear

on your screen:

RING

TIME: 04-28 12:30

1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 160 161

Sem comentários

Zyxel-communications U-336SA Manual do Utilizador Página 69