ZyXEL Communications P-660 series Guia do Utilizador descarregar pdf (Página 40)

Chapter 3 Wizard Setup for Internet Access

P-660R-F1 Series User’s Guide

The following table describes the fields in this screen.

Figure 19 Internet Connection with PPPoA

The following table describes the fields in this screen.

Table 10 Internet Connection with ENET ENCAP

LABEL DESCRIPTION

Obtain an IP

Address

Automatically

A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not

fixed; the ISP assigns you a different one each time you connect to the Internet.

Select Obtain an IP Address Automatically if you have a dynamic IP address.

Static IP

Address

Select Static IP Address if your ISP gives you a fixed IP address.

IP Address Enter your ISP assigned IP address.

Subnet Mask Enter a subnet mask in dotted decimal notation.

Refer to the appendices to calculate a subnet mask If you are implementing

subnetting.

Gateway IP

address

You must specify a gateway IP address (supplied by your ISP) when you use ENET

ENCAP in the Encapsulation field in the previous screen.

First DNS

Server

Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP

clients along with the IP address and the subnet mask.

Second DNS

Server

As above.

Back Click Back to go back to the previous wizard screen.

Apply Click Apply to save your changes back to the ZyXEL Device.

Exit Click Exit to close the wizard screen without saving your changes.

Table 11 Internet Connection with PPPoA

LABEL DESCRIPTION

User Name Enter the login name that your ISP gives you.

Password Enter the password associated with the user name above.

Back Click Back to go back to the previous wizard screen.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 267 268

Sem comentários

ZyXEL Communications P-660 series Guia do Utilizador Página 40