ZyXEL Communications P-660 series Guia do Utilizador descarregar pdf (Página 71)

Chapter 5 LAN Setup

P-660R-F1 Series User’s Guide

5.5 LAN Client List

This table allows you to assign IP addresses on the LAN to specific individual computers based on

their MAC Addresses.

Every Ethernet device has a unique MAC (Media Access Control) address. The MAC address is

assigned at the factory and consists of six pairs of hexadecimal characters, for example,

00:A0:C5:00:00:02.

To change your ZyXEL Device’s static DHCP settings, click Network > LAN > Client List. The

screen appears as shown.

Figure 37 LAN Client List

Remote DHCP Server If Relay is selected in the DHCP field above then enter the IP address of the

actual remote DHCP server here.

DNS Server

DNS Servers

Assigned by DHCP

Server

The ZyXEL Device passes a DNS (Domain Name System) server IP address to

the DHCP clients.

Primary DNS Server

Secondary DNS

Server

This field is not available when you set DHCP to Relay.

Enter the IP addresses of the DNS servers. The DNS servers are passed to the

DHCP clients along with the IP address and the subnet mask.

If the fields are left as 0.0.0.0, the ZyXEL Device acts as a DNS proxy and

forwards the DHCP client’s DNS query to the real DNS server learned through

IPCP and relays the response back to the computer.

Apply Click Apply to save your changes back to the ZyXEL Device.

Reset Click Reset to begin configuring this screen afresh.

Table 20 DHCP Setup

LABEL DESCRIPTION

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 267 268

Sem comentários

ZyXEL Communications P-660 series Guia do Utilizador Página 71