ZyXEL Communications P-660 series Guia do Utilizador descarregar pdf (Página 70)

Chapter 5 LAN Setup

P-660R-F1 Series User’s Guide

5.4 DHCP Setup

Use this screen to configure the DNS server information that the ZyXEL Device sends to the DHCP

client devices on the LAN.

Figure 36 DHCP Setup

The following table describes the labels in this screen.

Back Click Back to return to the previous screen.

Apply Click Apply to save the changes.

Cancel Click Cancel to begin configuring this screen afresh.

Table 19 Advanced LAN Setup (continued)

LABEL DESCRIPTION

Table 20 DHCP Setup

LABEL DESCRIPTION

DHCP Setup

DHCP If set to Server, your ZyXEL Device can assign IP addresses, an IP default

gateway and DNS servers to Windows 95, Windows NT and other systems that

support the DHCP client.

If set to None, the DHCP server will be disabled.

If set to Relay, the ZyXEL Device acts as a surrogate DHCP server and relays

DHCP requests and responses between the remote server and the clients.

Enter the IP address of the actual, remote DHCP server in the Remote DHCP

Server field in this case.

When DHCP is used, the following items need to be set:

IP Pool Starting

Address

This field specifies the first of the contiguous addresses in the IP address pool.

Pool Size This field specifies the size, or count of the IP address pool.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 267 268

Sem comentários

ZyXEL Communications P-660 series Guia do Utilizador Página 70