
Chapter 18 xDSL Line Data
IES-1248-51V User’s Guide
159
3 To edit an existing group, select its Index number from the list. You can change
the pair bond by selecting a new pair from the Member Port list. Click Modify to
save your changes.
Figure 73 Basic Setting > G.bond
The following table describes the labels in this screen.
Table 32 Port > G.bond
LABEL DESCRIPTION
Name Enter a descriptive name for a group of DSL lines.
Member Port Select a pair of ports to bond from this menu.
Add Click the Add button to save your changes to the list below as a new
pair bond.
Clicking Add saves your changes to the IES-1248-51V’s volatile
memory. The IES-1248-51V loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to start configuring this section of the screen again.
Index This field indicates the item’s position on the list. It has no actual
bearing on the pair bond in question.
Click the Index number to load the pair bond port numbers into the
Member Port list for editing. To save any changes, click the Modify
button that appears in place of the Apply button.
Name This field displays the descriptive name that you associated with the
pair bond.
Member Ports This field indicates which ports are pair bonded.
Us Rate (kbps) This field indicates the upstream data rate in kilobits per second for
the pair bonded ports.
Ds Rate (kbps) This field indicates the downstream data rate in kilobits per second for
the pair bonded ports.
Select Use these check boxes in this column to select items you want to
delete.
Delete Click this button to delete any items in the listed that have been
selected.
Comentários a estes Manuais