
Chapter 22 Multicast VLAN
IES-1248-51V User’s Guide
194
Start Multicast IP Enter the beginning of the range of multicast IP addresses. The IP
address must be a valid multicast IP address, between 224.0.0.0 and
239.255.255.255.
End Multicast IP Enter the end of the range of multicast IP addresses. The IP address
must be a valid multicast IP address, between 224.0.0.0 and
239.255.255.255.
Apply Click Apply to save your changes to the IES-1248-51V’s volatile
memory. The IES-1248-51V loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to begin configuring the fields afresh.
MVLAN ID Select the VLAN ID of the multicast VLAN for which you want to look
at or remove the multicast IP addresses currently added to it.
Name This field displays the name of this multicast VLAN.
State This field shows whether this multicast VLAN is active (Enable) or
inactive (Disable).
Entry Index This field displays the index number of each multicast VLAN group
(the range of multicast IP addresses) configured for this multicast
VLAN.
Start Multicast IP This field displays the beginning of this range of multicast IP
addresses.
End Multicast IP This field displays the end of this range of multicast IP addresses.
Select Select this, and click Delete to remove the multicast VLAN group.
Delete Click this to remove the selected multicast VLAN groups.
Cancel Click Cancel to begin configuring the fields afresh.
Table 47 MVLAN Group (continued)
LABEL DESCRIPTION
Comentários a estes Manuais