ZyXEL Communications IES-1248-51 Guia do Utilizador descarregar pdf (Página 80)

100

101

Chapter 8 Tutorials

IES-1248-51V User’s Guide

2 In the navigation panel, click Basic Setting, IP Setup. The IP Setup screen

appears.

Figure 26 IP Setup

3 Use this screen to change the IP address, subnet mask, and default gateway IP

address for your network. Apply the settings.

Note: If you change the IP address of the IES-1248-51V, after you click Apply IP

setting, you have to use the new IP address to log into the web configurator

again.

4 If your subscribers use VPI 0 and VCI 33 (the default for all of the ADSL ports), go

to step 13. Otherwise, use the following steps to change the VPI and VCI settings

for all of the ADSL ports.

First, you will delete the default virtual channel from all of the ADSL ports. (You

cannot edit it). Then, you will configure a new virtual channel for a port and copy

it to the other ADSL ports.

Adding another virtual channel without deleting the default virtual channel is not

recommended since you cannot set the new channel to be the port’s super

channel. The super channel can forward frames belonging to multiple VLAN groups

(that are not assigned to other channels). A channel that is not the super channel

can only forward frames with a single VLAN ID (that is configured on that

channel). In this case, the IES-1248-51V drops any frames received from the

subscriber that are tagged with another VLAN ID.

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 653 654

Comentários a estes Manuais

Sem comentários

ZyXEL Communications IES-1248-51 Guia do Utilizador Página 80

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ZyXEL Communications IES-1248-51