
Chapter 8 Tutorials
IES-1248-51V User’s Guide
85
8.3 H.248 Configuration Example
This section provides an example of using configuring the IES-1248-51V to
communicate with an H.248 MGC (Media Gateway Controller). You should already
have information about the MGC’s configuration.
Take the following steps to configure H.248 on the IES-1248-51V.
1 Create an H.248 profile.
Use the VoIP > H.248 Profile screen (see Section 45.3 on page 331).
• Give the profile a name and enter the configuration information about the MGC.
This example creates a profile named MEGACO for an MGC with an IP address
172.16.19.24 using port 2944, the UDP transport method and the LONG
encoding format. If you were not provided with information for any of the fields
in this screen, leave them at their defaults.
Figure 37 H.248 Profile Example
•Click Add. The new profile displays at the top of the screen with the other H.248
profiles.
2 Configure the H.248 media gateway settings.
Use the VoIP > Media Gateway screen (see Section 45.5 on page 335).
• Enter the H.248 media gateway.
•Enter the MG Name (MG1 in this example). This must correspond with the
information on the MGC.
• Enter the port number the IES-1248-51V uses to send and receive H.248
packets (2944 in this example).
Comentários a estes Manuais