
Chapter 20 IGMP
IES-1248-51V User’s Guide
176
20.4 IGMP Bandwidth Screen
Use this screen to set up bandwidth requirements for multicast channels. To open
this screen, click Advanced Application > IGMP > Bandwidth.
Figure 81 IGMP Bandwidth
The following table describes the labels in this screen.
Table 37 IGMP Bandwidth
LABEL DESCRIPTION
Default Bandwidth Enter the default bandwidth for multicast channels for which you have
not configured bandwidth requirements.
Apply Click Apply to save your changes to the IES-1248-51V’s volatile
memory. The IES-1248-51V loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Index Select a unique number for this setting. If you select a number that is
already used, the new setting overwrites the old one when you click
Apply.
Start Multicast IP Enter the beginning of the multicast range.
End Multicast IP Enter the end of the multicast range. For one multicast address, enter
the start of the multicast range again.
Bandwidth Enter the bandwidth requirement for the specified multicast range.
Comentários a estes Manuais