
Chapter 44 Alarm
IES-1248-51V User’s Guide
316
44.5 Alarm Port Setup Screen
Use this screen to set the alarm severity threshold for recording alarms on an
individual port(s). The system reports an alarm on a port if the alarm has a
severity equal to or higher than the port’s threshold.
To open this screen, click Alarm > Alarm Port Setup.
Figure 147 Alarm Port Setup
The following table describes the labels in this screen.
Table 109 Alarm Port Setup
LABEL DESCRIPTION
Port This column lists the device’s individual DSL and Ethernet interfaces.
Severity Select an alarm severity level (critical, major, minor or info) as the
threshold for recording alarms on this port. Critical alarms are the
most severe, major alarms are the second most severe, minor alarms
are the third most severe and info alarms are the least severe.
Apply Click Apply to save your changes to the IES-1248-51V’s volatile
memory. The IES-1248-51V loses these changes if it is turned off or
loses power, so use the Config Save link on the navigation panel to
save your changes to the non-volatile memory when you are done
configuring.
Cancel Click Cancel to start configuring the screen again.
Comentários a estes Manuais