
Chapter 68 VoIP Commands
IES-1248-51V User’s Guide
546
68.4.1 voip diagnostic mlt test Command Example
The following example tests the REN of the line connected to port 8.
voip diagnostic mlt relay set
<port> in|out|both [<timeout>
[force]]
This command turns the test relay function on
on the specified port. When the test relay
function is on, you can run tests using
diagnostic equipment connected to the TEST
IN and TEST OUT ports.
port: Port number, 1~48
in: Turn on test-in relay
out: Turn on test-out relay
both: Turn on test-in and test-out relay
timeout: Relays will be turned off
automatically while the specified timer is
timeout, 1~65535 minutes
force: Force to set relays even the port is in
use
M/
H
voip diagnostic mlt relay set
<port> off [force]
This command turns the test relay function off
on the specified port. When the test relay
function is off, you cannot run line tests. Test
relay functions are off by default.
M/
H
voip diagnostic mlt relay show This command shows the test relay condition
of the IES-1248-51V. Test relay functions are
off by default.
L/L
Table 209 voip diagnostic Commands (continued)
COMMAND DESCRIPTION P
ras> voip diagnostic mlt test 8 ren
Comentários a estes Manuais