
Chapter 57 MAC Commands
IES-1248-51V User’s Guide
422
57.2.1 MAC Count Show Command Example
The following example displays the MAC count settings for xDSL port 4.
57.2.2 MAC Count Enable Command Example
The following example turns on the MAC count filter on xDSL port 4.
57.2.3 MAC Count Disable Command Example
The following example turns off the MAC count filter on xDSL port 4.
57.2.4 MAC Count Set Command Example
The following example sets the MAC count filter to allow up to 50 MAC addresses
to be dynamically learned on xDSL port 7.
57.3 MAC Anti-Spoofing Commands
Use MAC anti-spoofing commands to configure checking for authorized MAC to IP
address bindings for incoming packets on the IES-1248-51V.
ras> switch mac count show 4
port status count
---- ------ -----
4 V 128
ras> switch mac count enable 4
ras> switch mac count disable 4
ras> switch mac count set 7 50
Table 154 MAC Anti-Spoofing Command Summary
COMMAND DESCRIPTION P
switch mac antispoofing disable Turns off the MAC antispoofing. H/
H
switch mac antispoofing enable Turns on the MAC antispoofing. H/
H
switch mac antispoofing show Shows the MAC antispoofing status. M/
L
Comentários a estes Manuais