
Chapter 66 Virtual Channel Commands
IES-1248-51V User’s Guide
525
66.5.2 RPVC Gateway Set Command Example
The following example has the device use a VLAN ID of 1 and IEEE 802.1p priority
of 3 when sending 2684 routed mode traffic to a gateway at IP address
192.168.10.102.
66.5.3 RPVC Gateway Show Command Example
The following is an example.
66.5.4 RPVC Gateway Delete Command Example
The following example has the device remove a 2684 routed mode traffic gateway
entry for IP address 192.168.10.102.
66.5.5 RPVC Set Command Example
The following example adds a PVC for 2684 routed mode traffic. It is for DSL port
1, VPI 8, VCI 35. It sets the DEFVAL profile for downstream traffic shaping and for
upstream traffic policing. The CPE device’s WAN IP address is 192.168.10.200 with
a netmask of 32 and the gateway’s IP address is 192.168.10.102.
Figure 233 RPVC Gateway Set Command Example
ras> adsl rpvc gateway set 192.168.10.102 1 3
Figure 234 RPVC Gateway Show Command Example
ras> adsl rpvc gateway show
gateway ip vid
--------------- ----
192.168.10.102 1
Figure 235 RPVC Gateway Delete Command Example
ras> adsl rpvc gateway delete 192.168.10.102
Figure 236 RPVC Set Command Example
ras> adsl rpvc set 1 8 35 DEFVAL,DEFVAL 192.168.10.200/32 192.168.10.102
Comentários a estes Manuais